Automotive coating curing furnace temperature tracker, optimization of coating curing process

Painting is a system engineering that includes three basic processes: surface treatment of the coated object before painting, coating process and drying, as well as designing a reasonable coating system and selecting suitable coatings,

Determine good working environment conditions and carry out important links such as quality, process management, and technical economy. Anti rust and anti-corrosion coating quality is one of the important aspects of overall product quality. product

The appearance quality not only reflects the protective and decorative performance of the product, but also is an important factor that constitutes the value of the product.

The temperature control in the curing stage of the painting process is particularly important, as the curing temperature and time directly affect the quality of the product.

For example, if the actual production temperature does not meet the curing temperature required by the process, or if the actual curing time does not meet the curing time required by the process, it will cause the coating to peel off.

The actual production temperature exceeds the curing temperature required by the process, or the actual curing time exceeds the curing time required by the process, which can cause discoloration of the coating and, in severe cases, damage the structure of the coating

Coating detachment.

The energy consumption of painting equipment is relatively high, and reasonable formulation of process standards can save a lot of resources. By analyzing actual data, the current process can be fine tuned. Ensure yield rate and improve

Production efficiency and cost savings have always been our mission.

In the automotive market, the manufacturing process of cars, trucks, bicycles, and other related transportation vehicles requires various coatings, polymers, and adhesives to be coated and cured. For this, it is necessary to

To protect the appearance and safety of the finished product, overheating treatment should be carried out in accordance with regulations such as CQI-12, CQI-9, and ISO9000.

To cure the coating applied to the product, it is necessary to heat the product to the critical curing temperature through the furnace process and maintain it for the specified time

Temperature. The curing specifications vary depending on the coating, and the heating rate of the product depends on the material (steel or aluminum), size, and shape. To prove that the product meets the required curing time, it is necessary to

Conduct furnace temperature curve testing. The product temperature is recorded throughout the entire furnace process, generating a temperature curve and comparing it with the curing time to understand the curing effect of automotive coatings.

The function of Wickon furnace temperature tracker:

·Prove that the coating has reached the curing time to ensure product quality and eliminate defective or costly rework

·Accurately, quickly, and efficiently set up a new furnace process without the need for repeated experimentation

·Immediately identify and resolve process issues to reduce downtime

·Generate the most effective process validation report to meet any compliance requirements

·Quickly identify areas where the temperature of the car coating curing furnace does not meet the process requirements

The X series features direct USB communication, allowing information to be transmitted from the data logger to the PC as quickly as possible. It helps you understand the changes in furnace temperature during the coating curing process and helps you track

Tracking temperature, a powerful tracking and analysis software, can help you design almost perfect temperature curves, giving your products a stunning appearance and exquisite quality.

The Wickon furnace temperature tracker can help you conduct process statistical analysis for coating and curing, thereby enabling more precise control of product quality, improving work efficiency, reducing scrap rates, and achieving a lower cost

The purpose of low product cost

If you need to purchase a Wickon car coating curing furnace temperature tracker, please call our sales team to confirm the working environment and requirements, discuss suitable solutions, and send a purchase contract. Our shipment will be secure

The engineer will deliver the goods to your company for training to ensure that your workshop can fully utilize the functions of the furnace temperature tracker and ensure its service life. In the event of any accidents during use

You can communicate with our engineers to obtain warranty or repair services more quickly. In addition, emergency technical services can also be provided: once a month (technical personnel provide specific details within 1 hour)

Processing process and steps, manual on-site real-time technical service within 12 hours (can be postponed to the second day after 16:00 in the afternoon), accessories: on-site replacement within 4 hours